Sharp LC-32PD5X Manuel D’Utilisation

Use the following buttons on the remote control to 
operate the menu.

Press to switch to analogue mode. After 

switching from DTV, radio or external input 
mode to analogue mode, the TV jumps to 
the most recently viewed analogue channel.

 

Press to switch to DTV mode. After 
switching from analogue, radio or external 
input mode to DTV mode, the TV jumps to 
the most recently viewed DTV channel.

   Press to switch to radio mode. After 

switching from analogue, DTV or external 
input mode to radio mode, the TV jumps to 
the most recently tuned radio channel.

When the TV powers on for the fi rst time after 
purchase, perform the auto installation.

You can run the auto installation to set channels 
automatically.

To watch the analogue TV, select “Auto 
Installation” from Setup menu. (See page 19.)

When the TV accesses to DTV mode for the fi rst time, 
you need to run the  auto search. To scan all available 
services in your area, follow the procedures below.

After setting the channels, you can select 
a channel using CH 

r/s or 0—9 on the 

remote control unit. (See page 13.)

To watch DTV broadcasts, select “Auto 
Search” from Installation menu. (See page 32.)

After setting the channels, you can select 
a channel using CH 

r/s or 0—9 on the 

remote control unit. (See page 13.)

PD5X_en_b.indd   16

PD5X_en_b.indd   16

2006/12/22   14:28:43

2006/12/22   14:28:43