IBM T117 Manuel D’Utilisation
22
ENG
LI
S
H
Power Management
If your computer has
previously been used with a
CRT monitor and is currently
configured to a display mode
previously been used with a
CRT monitor and is currently
configured to a display mode
outside the range that the Flat
Panel monitor can display, you may
need to re-attach the CRT monitor
temporarily until you have
re-configured the computer,
preferably to 1280 x 1024 at 60Hz.
Panel monitor can display, you may
need to re-attach the CRT monitor
temporarily until you have
re-configured the computer,
preferably to 1280 x 1024 at 60Hz.
To benefit from power management, the monitor must be used in
conjunction with a computer that implements the Video Electronics
Standards Association (VESA) Display Power Management Signalling
(DPMS) Standard.
The power management feature is invoked when the computer recognizes
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable
period. There are several states as described in the table below.
For optimal performance, switch off your monitor at the end of each
working day, or whenever you expect to leave it unused for long periods
during the day.
* There may be a slight delay before the picture reappears.
Product Disposal
The fluorescent lamp in the liquid crystal display contains mercury.
Dispose of it as required by local ordinances and regulations.
Dispose of it as required by local ordinances and regulations.
As an ENERGY STAR
®
Partner, IBM has determined
that this product meets the ENERGY STAR
®
guidelines for energy
efficiency.
State
Power
Indicator
Screen
Restoring
Operation
Compliance
On
Steady green
Normal
Power
saving
Amber
Blank
Press a key or
move the
mouse. *
move the
mouse. *
E
NERGY
S
TAR®