Sears 172.10855 Manuel D’Utilisation
REV 10855
2-12-08
26
If the blade does not follow a straight line:
• Teeth are dull. This is caused by hitting a hard object such as a nail, dulling
teeth on one side. The blade tends to cut to the side with the sharpest teeth.
• Base is out of line or bent.
• Blade is bent.
• Edge guide or straight edge is not being used.
• Base is out of line or bent.
• Blade is bent.
• Edge guide or straight edge is not being used.
If the blade binds or smokes from friction:
• Blade is dull.
• Blade is on backwards.
• Blade is bent.
• Workpiece is not properly supported.
• Incorrect blade is being used.
• Blade is on backwards.
• Blade is bent.
• Workpiece is not properly supported.
• Incorrect blade is being used.
TROUBLESHOOTING
Sears and other Craftsman outlets have a large selection of 7
1
/
4
-inch Craftsman
steel carbide-tipped blades designed for specific cutting applications.
Contractor bulk packs are also available.
Sears and other Craftsman outlets also offer sawhorses, combination and
Sears and other Craftsman outlets also offer sawhorses, combination and
framing squares, straight edges, edge guides, and a large assortment of
clamps to help you with all your sawing needs.
Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman.
Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman.
ACCESSORIES
WARNING:
The use of attachments or accessories that are not
recommended for this tool might be dangerous and could result in serious injury.
!
27
NOTES