Manualsbrain.com
  1. Manuels
  2. Marques
  3. Audiovox
  4. 50-0300A-014 SERIES
  5. Manuel D’Utilisation

Audiovox 50-0300A-014 SERIES Manuel D’Utilisation

Télécharger
Page de 6
                                                                                                6
 
 
 
15.   Release video screen from locked position. 
        Lower video screen to viewing position for           
        access to mounting location in top of video  
        system housing.  
16.   Raise video system into approximate position       
        and connect all wiring to components. Connect    
        wiring and cabling to video system per  
        instruction included with video system. 
17.   Check function of all component and lights.  See 
operating instruction for video system operations 
check.  For further assistance, refer to the video  
        system manual for the technical support phone  
        number listed for your area. 
 
 
 
 
 
18.   Insert video system into opening in console.  
        Note : Make sure wires do not get pinched between video system and console. 
        Align holes in housing with clips in mounting bracket. Secure using (4) four 6-32x 3/4" screws (item 1   
pg.2) and (4) four 3.5mm washers (item 3 pg. 2). See Figure 8. 
        Caution : Do not overtighten screws.  
                                                                     
 
 
 
 
 
 
 
 
 
           
19.  Tighten screw previously installed  to secure rear of       
console to headliner.  Caution:  Do not overtighten 
screws or damage to vehicle roof may occur. 
20.  Raise video screen into locked position. 
21.  Install speaker grille (item 7 pg. 2). Align clips in 
grille with holes in console and press firmly.           
See Figure 9. 
22.  If speaker upgrade kit was not installed, install cover 
plate (item 8 pg. 2) at front of console and secure 
using (2) # 6 X 1/2" screws (item 4 pg. 2). 
23.  Install cover plate decal (item 9 pg 2). 
 
 
 
 
 
 
FIGURE 8 
FIGURE 9