Audiovox 50-0246x-015 Series Manuel D’Utilisation

 

 

           INSTALLATION INSTRUCTIONS  

          FOR 

            50-0246x-015 SERIES    1181270 

  1999 DODGE DURANGO *  

      

  OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM          

 
 
 
 
 
 
                                                  
 
 
 
 
 
 
 
 
 
 

 
These instructions are intended for use only by experienced professionals in the automotive 

                 customizing business. Special tools and equipment, as well as specialized handling and care 
                 of product during installation, may be required. Before beginning this installation, carefully read 

through the following instructions. Use extreme care when cutting headliner material. 
Check for wiring or other componentry above headliner material. Cut only where indicated. 
 

Materials/ Tools required for this installation: 
            1.  #2 Phillips screwdriver  

2. Powered screwdriver or drill with adapter 

            3. Razor knife or similar 

4.  1/4" hex socket bit 

            5. Awl or similar tool 

6.  5/16" hex socket bit 

            7. Audiovox Series 640/650 Video Module 

 

 

                              

  FOR USE IN VEHICLES EQUIPPED WITH FACTORY INSTALLED                                  

                     REAR AIR CONDITIONING  and  WITH FACTORY OVERHEAD CONSOLE ONLY.      

  

      
 
 
 

 

May 19, 1999 

Printed in the U.S.A 

INSTALLATION  INSTRUCTION  # 44-0024B