Husqvarna 327P4 Manuel D’Utilisation
ASSEMBLY
English
–
17
of 4 Nm. After the machine has been in use for around 20
hours, re-tighten the screws to 4 Nm.
hours, re-tighten the screws to 4 Nm.
Assembly of the saw attachment
(327P5)
Assembly
•
Loosen the coupling by turning the knob.
•
Align the tab of the attachment (A) with the arrow on
the coupling (B).
the coupling (B).
•
Push the attachment into the coupling until the
attachment snaps into place.
attachment snaps into place.
•
Before using the unit, tighten the knob securely.
Dismantling
•
Loosen the coupling by turning the knob (at least 3
times).
times).
•
Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
the engine end, pull the attachment straight out of the
coupling.
A
B