Echo SRM-410U Manuel D’Utilisation

2.REPLACING SPOOL

Keep line tight on spool.

A.  Snap spool into housing while pulling line through eyelets with 

about 15 cm (6 in) extending out.

CAUTION
Knob tightens counterclockwise, “left”.

B.  Fasten spool to housing with shaft bolt, spring, and knob.

1.  Always use the end of the line for cutting. Forcing the cutter head 

too close to the work will result in reduced effi ciency and broken 
line.

2.  Maintain the line at the recommended length of 12.5 to 15 cm (5 

to 6 in). A longer line will reduce engine speed, a shorter line may 
result in engine damage.

3.  The trimmer head rotates counterclockwise. Always cut with the 

head tilted to the right to defl ect debris away from the operator.

4.  Always observe the SAFETY RULES on Page 3 when using the 

unit.

Housing

Bolt

Spring

Knob