Dolmar MS-245.4 U Manuel D’Utilisation

CORRECT HANDLING OF MACHINE

Attachment of shoulder strap

– Adjust the strap length so that the cutter blade will be

kept parallel with the ground.

For MS-245.4 U, MS-245.4 UE

NOTE: Be careful not to trap clothing, etc., in the buckle.

Observe the applicable accident prevention regulations!

STARTING

Move at least 3 m away from the place of refuelling. Place the Petrol Brushcutter on a clean piece of ground taking care that the cutting tool

does not come into contact with the ground or any other objects.

A: Cold start

1) Set this machine on a flat space.

OPERATION

Lock-off lever

High speed

Low speed

Throttle lever

Hanger

POINTS IN OPERATION AND HOW TO STOP

Detachment

For MS-245.4 C, MS-245.4 CE

– In an emergency, push the notches (1) at both sides, and you can detach the

machine from you.

Be extremely careful to maintain control of the machine at this time. Do not

allow the machine to be deflected toward you or anyone in the work vicinity.

WARNING: Failure to maintain complete control of the machine at all could

result in serious bodily injury or DEATH.

For MS-245.4 U, MS-245.4 UE

– In an emergency, push the notches (2) at both sides, and

you can detach the machine from you.

Be extremely careful to maintain control of the machine

at this time. Do not allow the machine to be deflected

toward you or anyone in the work vicinity.

WARNING: Failure to maintain complete control of the

machine at all could result in serious bodily

injury or DEATH.

MS-245.4 C

MS-245.4 CE

MS-245.4 U

MS-245.4 UE

STOP

(1)