Zenoah BC250 Manuel D’Utilisation
18
6. Set up
English
■ INSTALLING HANDLE
• Mount the handle to the shaft tube and clamp it at a
• Mount the handle to the shaft tube and clamp it at a
location that is comfortable to you. (SE1)
(1) About 19 inches (48cm)
■ INSTALLING DEBRIS GUARD
• Put the debris guard on the gear box, attach it with
• Put the debris guard on the gear box, attach it with
the screws and hardware provided. (SE2)
■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft, by inserting the
1. While locking the gear shaft, by inserting the
supplied tool into the upper holder on the gear box,
loosen and remove the hexagon nut (left-handed).
loosen and remove the hexagon nut (left-handed).
2. Fit the line head assembly to the gear shaft over the
holders. Hand-tighten it securely.
Blades should not be used on this model trimmer.
Blades should not be used on this model trimmer.
(1)
SE1
SE2
SE3