MTD CSV 020 Manuel D’Utilisation

Refer to the Engine Operator’s manual packed with your chipper/

shredder vacuum for instructions on starting and stopping the 

engine.

1. 

Unhook bag straps from the lower handle.

2. 

Unsnap bag clip from the top of lower handle. See Figure 

5-1.

3. 

Grasp bag handle with one hand and pull lock rod on 

mounting bracket with other hand toward engine to 

release.

4. 

Lift bag off back of unit.

5. 

Twist the two buttons on the back of the bag to unlock and 

empty contents. See Figure 5-2. Hold bag handle and bag 

clip while emptying the contents.

6. 

Compress bag opening and fold inner flap over opening.

7. 

Fold outer flap over inner flap and insert buttons on the 

bag through metal outlets. See Figure 5-2.

8. 

Twist the buttons to lock bag. Place bag back onto unit as 

instructed in Assembly & Set-Up.

Do not at any time make any 

adjustments without first stopping engine and 

disconnecting spark plug wire. 

Do not attempt to shred, chip, or 

vacuum any material larger than specified on the 

machine or in this manual. Personal injury or 

damage to the machine could result.

IMPORTANT: The flail screen is located inside the housing in 

the discharge area. If the flail screen becomes clogged, remove 

and clean as instructed in Maintenance & Adjustments. For best 

performance, it is also important to keep the chipper blade 

sharp.