Dixon 539 132250 Manuel D’Utilisation

12

ASSEMBLY

1.  Position upper chute support against bagger 

inlet, fl ush at outer edges. See Illlustration.

2.  Using support as a template, drill two 

3

/

8

" holes 

into bagger hood.

UPPER CHUTE 

SUPPORT

BAGGER INLET

NUT

BAGGER 

HOOD

FLAT WASHERS

HEX BOLT

FLEX TRIM

3.  Secure upper chute support to hood with hex 

bolts, washers and nyloc nuts.

1¾ BOLT

2¾ BOLT

WEIGHT BRACKET

WEIGHT PLATES

1.  Bolt weight plates to weight brackets using four 

1¾" bolts and four nuts.

2.   Slide both weight brackets over the front tube on 

the frame, positioning the assembly in the center 
of the frame.

3.   Secure with four 2¾" bolts and four nuts.

2¾ BOLT

NUT

3¾ BOLT

WEIGHT BRACKET

CAST WEIGHT

1.  Bolt one cast weight and two weight brackets 

together using four 2¾" bolts and four nuts.

2.   Slide both weight brackets over the front tube on 

the frame, positioning the assembly in the center 
of the frame.

3.   Secure with four 3¾" bolts and four nuts.

FRONT TUBE

FRONT TUBE