Remington Power Tools 111174-01 Manuel D’Utilisation

6

•  Never try cutting through two logs at same time. 

Only cut one log at a time.

•  Do not bury guide bar nose or try plunge cut (boring 

into wood using guide bar nose).

•  Watch for shifting of wood or other forces that may 

pinch chain.

•  Use extreme caution when reentering a previous cut.
• Use low-kickback chain and guide bar supplied 

with this chain saw. Only replace these parts with 
chains and guide bars listed in this manual. 

•  Never use dull or loose chain. Keep chain sharp 

with proper tension.

Follow maintenance instructions in this manual. Proper 
cleaning of saw and chain and guide bar maintenance 
can reduce chances of kickback. Inspect and maintain 
saw after each use. This will increase the service life of 
your saw. Note: Even with proper sharpening, risk of 
kickback can increase with each sharpening.

1.  Unplug chain saw from power source 

•  when not in use
•  before moving from one place to another
• before servicing
• before changing accessories or attachments, 

such as saw chain and guard

2.  Inspect chain saw before and after each use. 

Check saw closely if guard or other part has 
been damaged. Check for any damage that may 
affect operator safety or operation of saw. Check 
for alignment or binding of moving parts. Check 
for broken or damaged parts. Do not use chain 
saw if damage affects safety or operation. Have 
damage repaired by authorized service center.

3.  Maintain chain saw with care.

•  Never expose saw to rain.
• Keep chain sharp, clean, and lubricated for 

better and safer performance.

•  Follow steps outlined in this manual to sharpen 

chain.

•  Keep handles dry, clean, and free of oil and 

grease.

•  Keep all screws and nuts tight.
• Inspect power cord often. If damaged, have 

repaired by authorized service center.

•  Never carry chain saw by power cord.
•  Never yank power cord to unplug it.
• Keep power cord from heat, oil, and sharp 

edges.

1.  Remove all items from carton.
2.  Check all items for any shipping damage. If 

you find any damage or if any parts are missing, 
call Technical Services at 1-800-626-2237 for 
prompt service.

• Inspect extension cords often and replace if 

damaged.

4.  When servicing, use only identical replacement 

parts.

5.  When not in use, always store chain saw
 

•  drain oil after each use and before storing

          saw to prevent oil leakage.
 

•  in a high or locked place, out of children’s

          reach 

•  in a dry place
• in a carrying case or with scabbard over guide 

bar