Remington Power Tools M15014AS Manuel D’Utilisation

20

If storing saw for more than 30 days, follow steps 
below.
1.  Drain oil tank after each use.
2.  Remove and clean guide bar and chain. Clean 

guide bar and chain by soaking in petroleum 
based solvent or mild soap and water mix-
ture.

3.  Dry guide bar and chain.
4.  Place chain in container filled with oil. This 

will prevent rust.

5.  Wipe a thin coating of oil over surface of guide 

bar.

6.  Wipe off outside of saw body. Do this with soft 

cloth dampened with a mild soap and water 
mixture.

7. Store 

chain 

saw

•  in a high or locked place, out of children’s 

reach

•  in a dry place

For original replacement parts and accessories, 
contact your nearest Authorized Dealer or Au-
thorized Service Center for this product. If they 
can not supply the part or accessory, contact your 
nearest Parts Central listed on page 74. Each Au-
thorized Dealer, Authorized Service Center, and 
Parts Central is independently owned and oper-
ated.  You may also order parts from the "Online 
Outlet" at www.remingtonpowertools.com.
See pages 72 through 73 for an Illustrated Parts 
List.
If you need additional referral information, contact 
our Technical Service Department (see Technical 
Service).
In Canada call 1-800-561-3372 for parts and service 
information.

Note: Only use original replacement parts. This 
will protect your warranty coverage for parts 
replaced under warranty.
Each Authorized Service Center is independently 
owned and operated.

If product requires warranty service, return it to 
nearest Authorized Service Center. You must show 
proof of purchase. If faulty materials or workmanship 
caused damage, we will repair or replace product 
without charge. Note: Normal wear, misuse, abuse, 
neglect, or accidental damage is not covered under 
warranty.

If product requires service, return it to nearest 
Authorized Service Center. Repairs will be billed 
to you at regular repair list prices.
For additional Service Center or warranty informa-
tion, call 1-800-626-2237 or visit our Technical 
Service web site at www.remingtonpowertools.
com.

Replacement saw chains may be available at your 
local hardware or home improvement store.
The following list gives the specifi cations  for 
replacement chains.
All chains will be .050 gauge, 3/8 pitch.
 

10" chains have 42 drive links

 

12" chains have 48 drive links

 

14" chains have 52 drive links

 

16" chains have 58 drive links

You may also order the replacement saw chains 
from the "Online Outlet" at www.remington-
powertools.com using the part number listed in 
the illustrated parts list on pages 72-73 of this 
manual.