Multiquip GB12BP Manuel D’Utilisation

1.  Place the tripod on a firm level surface so that it will 

not slide or turn over. Make sure there is enough space 

around the unit for the tripod legs to be deployed.

2.  Remove tripod from its carrying case. The tripod legs 

are secured by a black velcro strap (Figure 8). Squeeze 

both tabs on each side of buckle to unlock strap and 

allow tripod legs (Figure 9) to be deployed.

SQUEEZE

VELCRO

STRAP

BUCKLE

TRIPOD

LEGS

3.  Next, pull upward on the mast and let the tripod legs 

deploy. Once the tripod legs have been fully deployed 

make sure the legs are locked by securing the latch.

 

The latch (Figure 10) has two positions, upper and 

lower. Placing the latch in the upper position will provide 

1 ft. ( 305 mm) more height.

DEPLOYMENT

LATCH

UPPER

LOWER

MAST