Troy-Bilt LS 33 TB Manuel D’Utilisation

See the Engine Operator’s Manual for the location and function 

of the controls on the engine.

The beam locks are used to secure the beam in either the 

horizontal position or the vertical position. The vertical beam 

lock is located next to the engine. The horizontal beam lock is 

located on the beam support latch bracket.

Use the control handle to move the log splitter wedge forward 

and backward along the beam. It has three positions; Forward, 

Neutral and Reverse. See the Operation section for instructions.

Use the dipstick to check the hydraulic fluid level.

The log dislodger is designed to remove any partially split wood 

from the wedge while it is retracting. This may occur while 

splitting large diameter wood or freshly cut wood.

The log tray is designed to catch the log after it is split.

Use the hitch coupling to attach the log splitter to a towing 

vehicle for transportation. 

The jack stand supports the log splitter while in the operating 

position.