Snapper 2400 Series Manuel D’Utilisation
18
Regular
Maintenance
Maintenance
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your rider and mower.
* Refer to engine owner’s manual. Change original engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
*** Service after the first 50 hours of operation, then every 250 hours of operation.
**** Service after the first 25 hours of operation, then every 250 hours of operation.
***** See you dealer.
Tire
Pressure
Front
10-12 psi (,68 - ,82 bar)
Rear
10-12 psi (,68 - ,82 bar)
Figure 9. Checking Tire Pressure
CHECK TIRE PRESSURES
Tire Pressure should be checked periodically, and main-
tained at the levels shown in the chart. Note that these
pressures may differ slightly from the “Max Inflation”
stamped on the side-wall of the tires. The pressures
shown provide proper traction, improve cut quality, and
extend tire life.
tained at the levels shown in the chart. Note that these
pressures may differ slightly from the “Max Inflation”
stamped on the side-wall of the tires. The pressures
shown provide proper traction, improve cut quality, and
extend tire life.
SAFETY ITEMS
Before
Each
Use
Each
Use
Every 5
Hours
Hours
Every 25
Hours
Hours
Every
100
Hours
100
Hours
Every
250
Hours
250
Hours
Spring
& Fall
& Fall
Check Safety Interlock System
•
Check Tractor Brakes
•
Check Mower Blade Stopping Time
•
•
TRACTOR MAINTENANCE ITEMS
Before
Each
Use
Each
Use
Every 5
Hours
Hours
Every 25
Hours
Hours
Every
100
Hours
100
Hours
Every
250
Hours
250
Hours
Spring
& Fall
& Fall
Check Tractor/Mower for loose hardware
•
Lubricate Rear Axle Shafts
Yearly
Clean Battery & Cables
•
Check Tire Pressure
•
Clean Deck & Check/Replace Mower Blades**
•
Lubricate Rider & Mower
• ***
Transmission Maintenance *****
ENGINE MAINTENANCE ITEMS
Before
Each
Use
Each
Use
Every 5
Hours
Hours
Every 25
Hours
Hours
Every
100
Hours
100
Hours
Every
250
Hours
250
Hours
Spring
& Fall
& Fall
Check Engine Oil Level
•
Check / Change Engine Air Filter *
Change Engine Oil & Filter *
Inspect Spark Plug(s) *
Check / Replace Fuel Filter *