Harbor Freight Tools 65076 Manuel D’Utilisation

Page de 18
24 ton log splitter
65076
set up, operating, and servicing 
instructions
Warning!
iMportant inForMation
The  Hitch  Coupler  MUST  be  properly 
secured to the hitch ball of the towing vehicle.  
After assembly and attachment, pull up and 
down on the Hitch Coupler to make sure the 
hitch ball is fitting snugly in the Hitch Coupler.  
there must be no play between the hitch 
ball and Hitch coupler.  If there is play, tighten 
the Adjustment Nut until no play is present.  If 
the Adjustment  Nut  is  too  tight,  the  Handle 
will  not  lock.   
carefully  read  and  follow 
the  complete  instructions  in  this  manual 
BeFore setup or use.
if  the  coupler  is  not  secured 
properly,  the  ball  could  come  loose 
while  the  log  splitter  is  in  motion, 
possibly  causing  property  damage, 
serious  personal  injury,  or 
deatH.
 
distributed exclusively by Harbor Freight tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
visit our website at: http://www.harborfreight.com
 read this material before using this product. 
Failure to do so can result in serious injury. 
save tHis Manual.
Copyright
©
 2008 by Harbor Freight Tools
®
.  All rights reserved.  No portion of this manual or any artwork 
contained  herein  may  be  reproduced  in  any  shape  or  form  without  the  express  written  consent  of 
Harbor Freight Tools.  Diagrams within this manual may not be drawn proportionally.  Due to continuing 
improvements,  actual  product  may  differ  slightly  from  the  product  described  herein.   Tools  required  for 
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.