Snapper SPA610 Manuel D’Utilisation

TRACTION CONTROL LEVERS 
Lubricate each with Pump Oiler 
(hand held oil can). 

INTERLOCK SWITCHES 
Inspect switches for ease 
of operation. DO NOT 
LUBRICATE! 

HYDRAULIC OIL  
Use SAE 10W-30 Oil. 

HYDRAULIC FILTER 
Change Hydraulic Oil and Filter 
after first 25 hours of operation. 
Thereafter, change Hydraulic Oil 
and Filter every 200 hours 
(monthly). 

MOTOR HUBS - Lubricate 
Motor Hubs with Anti-Seize 
Compound when replacing 
Wheel Hubs. 

DEFLECTOR 
Lubricate hinge 
points as required. 

HYDRAULIC HOSES & FITTINGS 
Check daily for leaks, cracks, kinks, 
and other signs of wear. 

MOWING DECK 
At end of each mowing period, 
remove grass and debris from 
under mowing deck and above 
rear SAFETY Shield. 

FRONT TIRES 
Check tire pressure before 
each mowing period. Inflate to 
25 psi. 

MOWER BLADES 
Check for tightness every 25 
hours of operation. Tighten 
capscrews to 75 foot pounds. 

FRONT WHEEL BUSHINGS 
& CASTER SHAFTS 
Lubricate with bearing grease 
weekly. 

CUTTER DECK 
BELT(S) 
Check for cracks 
or wear. 

CUTTER SHAFT 
SPINDLES 
Lubricate each with 
two (2) SHOTS of 
bearing grease 
daily. 

REAR TIRES - Check tire 
pressure before each mowing 
period. Inflate to 12-15 psi. 

Clean AIR FILTER Foam Element 
every 25 hours. Service PAPER 
ELEMENT every 100 hours. 

ENGINE 
Change Oil Filter after first 5 hours of 
operation. Change engine oil every 25 
hours under normal conditions or daily 
under extreme dusty conditions. Change 
Filter every 50 hours of operation. 

CONTROLS & LINKAGES 
Before each mowing period, coat all wear 
points, hinge points and sliding parts with 
medium duty oil.