Scag Power Equipment STT-31BSD Manuel D’Utilisation
38
Section 7
-NOTE-
Check the radiator for excessive debris and
clean with compressed air. Never spray a hot
engine with water, use only compressed air to
remove debris.
clean with compressed air. Never spray a hot
engine with water, use only compressed air to
remove debris.
3. Re-install the debris screen to the radiator.
C. Checking The Fan Belt Tension
Periodically check the fan belt tension. The belt should
deflect 1/2" with 10 pounds of pressure. See your Scag
dealer if the belt is in need of adjustment or replacement.
deflect 1/2" with 10 pounds of pressure. See your Scag
dealer if the belt is in need of adjustment or replacement.
Do not wash any portion of the equipment
while it is hot. Do not wash the engine; use
compressed air.
while it is hot. Do not wash the engine; use
compressed air.
CAUTION:
1. After each use, wash the mower and cutter deck.
Use cold water and automotive cleaners. Do not use
pressure cleaners.
pressure cleaners.
2. Do not spray electrical components.
3. Use a mild soap solution or a vinyl/rubber cleaner to
clean the seat.
4. Repair damaged metal surfaces using Scag touch-up
paint available from your authorized Scag dealer.
Wax the mower for maximum paint protection.
Wax the mower for maximum paint protection.
7.13 BODY, DECK, AND UPHOLSTERY