Scag Power Equipment SFZ61-28BS Manuel D’Utilisation

R

The parking brake linkage should be adjusted whenever the 
parking brake lever is placed in the “ENGAGE” position and 
the parking brake will not prevent the mower from moving. 
If the following procedures do not allow you to engage the 
parking brake properly, contact your Scag dealer for further 
brake adjustments.

Park the machine on a flat surface and block the 

1. 

caster wheels to prevent the machine from moving. 
Remove the ignition key.

Disengage the parking brake. See Figure 6-1.

2. 

Release the seat hold down latch and tilt the seat 

3. 

forward to gain access to the brake control linkage.

Remove the cotter pin securing the pivot to the brake 

4. 

control linkage. See Figure 6-2.

Push down on the brake control rod to disengage the 

5. 

parking brake and adjust the pivot until it meets the 
mounting hole. Insert the pivot into the brake control 
linkage and secure with the cotter pin.

Repeat steps 4 and 5 on the other side of the 

6. 

machine.

Test the parking brake.

7. 

RELEASE BRAKE
HANDLE

ADJUST HERE