Scag Power Equipment SFW36-16BV Manuel D’Utilisation
15
R
Section 4
ADJUSTING CUTTING HEIGHT
4.13
The mower deck can be adjusted from a height of 1-1/2
inches to 4-1/2 inches at 1/4-inch intervals. To adjust the
cutting height:
inches to 4-1/2 inches at 1/4-inch intervals. To adjust the
cutting height:
WARNING
DO NOT adjust the cutting height with the mower
blades rotating. Disengage the power to the cutter
blades and then adjust cutting height.
blades rotating. Disengage the power to the cutter
blades and then adjust cutting height.
Disengage the power to the cutter blades.
1.
Pull upward on the steering / brake control levers,
2.
lock the neutral latches and shift the transmission
into neutral and wait for all moving parts to come to
a complete stop.
into neutral and wait for all moving parts to come to
a complete stop.
Lift upward on the deck lift handle and remove the
3.
lanyard pins. See Figure 4-3.
DECK LIFT
HANDLE
HANDLE
LANYARD
PIN
PIN
Adjusting Cutting Height
Figure 4-3.
Insert the lanyard pins into the cutting height index at
4.
the desired cutting height and lower the cutter deck.
See Figure 4-3. Deck height decals are located on
the cutting height indexes as an aid in adjusting the
deck to the desired height. See Figure 4-4.
See Figure 4-3. Deck height decals are located on
the cutting height indexes as an aid in adjusting the
deck to the desired height. See Figure 4-4.
CUTTING HEIGHT
1-1/2
2
3
4
LH - 483894
1-3/4
2-1/4
2-1/2
2-3/4
3-1/4
3-1/2
3-3/4
4-1/4
4-1/2
Cutting Height Decal
Figure 4-4.