Scag Power Equipment SFW36-16BV Manuel D’Utilisation
21
R
Section 6
INSERT 0.015 FEELER GAUGE HERE
Clutch Air Gap Adjustment
Figure 6-4.
Tighten or loosen the adjusting bolt as needed to
3.
acheive the 0.015 inch airgap. See Figure 6-5.
Perform this operation at all three inspection
windows.
Perform this operation at all three inspection
windows.
ADJUSTMENT NUTS
ADJUSTMENT NUTS
Clutch Air Gap Adjustment
Figure 6-5.
This adjustment should be done every 500 hours of
operation or annually, whichever comes first. In cases
where the machine is heavily used, airgap settings should
be checked more often.
operation or annually, whichever comes first. In cases
where the machine is heavily used, airgap settings should
be checked more often.
If the air gap is too narrow, the clutch armature may drag
when disengaged, resulting in premature failure.
when disengaged, resulting in premature failure.
If the air gap is too wide, the clutch may be slow to engage
as the magnet must pull the armature in from a greater
distance.
as the magnet must pull the armature in from a greater
distance.