Troy-Bilt 52065 Manuel D’Utilisation

This Section describes the location and
function of the features and controls on
your machine.  Refer to Section 4: “Opera-
tion” for detailed operating instructions.

IMPORTANT: Refer to the separate engine
manual for detailed information about the
controls on the engine.

Pull the control bail (A, Figure 3-1) up
against the handlebar (engage bail) to
start rotation of the trimmer head.  Let go
of the control bail (disengage bail) to stop
the trimmer head. 

The trimmer head (B, Figure 3-1) is 
adjustable to an infinite number of height
settings from 1-1/2" to 4-1/2" (see “Adjust
Line Cutting Height” in Section 4).

The two trimming lines (C, Figure 3-1) are
secured to wire-looped line holders.
Replacing the trimmer lines is easy (see
“Changing Trimmer Lines” in Section 5).

The handlebar (D, Figure 3-1) has two
height settings (see “Adjust Handlebars”
in Section 4).

A heavy-duty plastic shield (E, Figures 3-1
and 3-1A) prevents debris build-up on the
engine.  The shield tilts forward for access
to the engine.

Use this lever (F, Figure 3-1) to change
engine speeds and to stop the engine.  The
throttle settings are shown on a decal next
to the lever.

The recoil starter (G, Figure 3-1) is used to
pull start the engine.

The fuel primer button (H, Figure 3-1)
allows a cold engine to be primed for
faster, easier starting.

Various symbols (shown
here, with word descrip-
tions) are used on the
unit.

1904403 (1/97)

1904403 (1/97)