Troy-Bilt 900 Manuel D’Utilisation
PTO / Blade Engage Knob
Activating the PTO engages power to the
cutting deck or other (separately available)
attachments. Pull outward on the PTO/Blade
Engage knob to activate it. Push the PTO/
Blade Engage knob inward to disengage
the power to the cutting deck or other
(separately available) attachments.
NOTE: The PTO/Blade Engage knob must
NOTE: The PTO/Blade Engage knob must
be in the disengaged (OFF) position when
starting the engine.
Parking Brake/Cruise Control Lever
Located in the center of the tractor’s dash panel
below the steering wheel, the Parking Brake/
Cruise Control lever is used to engage the
parking brake and the cruise control. Refer to
the Operation section of this manual for detailed
instructions regarding the parking brake.
NOTE: The parking brake must be set if the
NOTE: The parking brake must be set if the
operator leaves the seat with the engine running
or the engine will automatically shut off.
NOTE: Cruise control can NOT be engaged
NOTE: Cruise control can NOT be engaged
at the tractor’s fastest ground speed. If the
operator should attempt to do so, the tractor will
automatically decelerate to the fastest optimal
mowing ground speed.
WARNING!
Never leave a running machine
unattended. Always disengage PTO, set parking
brake, stop engine and remove key to prevent
unintended starting.
Fuel Level Indicator
The Fuel Level Indicator is located on the left side of the
tractor’s dash and indicates the amount of fuel in the gas
tank.
14
S
ection
4 — c
ontrolS
and
F
eatureS