Troy-Bilt TB280ES Manuel D’Utilisation

The electric starter circuit and battery are protected by a 40 

ampere fuse. If the fuse burns out, the electric starter will not 

operate. If the unit fails to start with the electric starter, perform 

the following steps to check the fuse inside the battery housing:
1. 

Open the battery cover as described in Replacing Battery. 

2. 

Remove fuse from socket and inspect as shown in Figure 

7-5. If it is burned out, replace with standard automotive 40 

ampere fuse.

3. 

Carefully place wiring back into housing, and reattach 

battery cover.
NOTE: The engine can be started manually if the fuse burns 

out.

The following steps should be taken to prepare your lawn mower 

for storage.
• 

Clean and lubricate mower thoroughly as described in the 

lubrication instructions.

• 

Coat mower’s cutting blade with chassis grease to prevent 

rusting.

• 

Refer to engine manual for correct engine storage 

instructions.

• 

Secure side discharge chute to handle as shown in Figure 

7-6.

• 

Store mower in a dry, clean area. Do not store next to 

corrosive materials, such as fertilizer.

When storing any type of power equipment in a poorly 

ventilated or metal storage shed, care should be taken to 

rust-proof the equipment. Using a light oil or silicone, coat the 

equipment, especially cables and all moving parts of your lawn 

mower before storage.

The battery must be stored with a full charge. Extended storage 

of a discharged battery will reduce life and capacity of the 

battery.