Alamo none Manuel D’Utilisation
OPERATION
GRASS KING 03/09
Operation Section 4-3
© 2009 Alamo Group Inc.
OPERA
T
ION
1. Standard Equipment and Specifications
Cutting Width
62” or 74”
Cutting Capacity (Diameter)
1” maximum
Cutting Height Range
1/2” to 6”
Cutting Housing
10-Gauge Top and 5-16” End-Plates with Bearing Guards
Cutter Shaft
4-1/2” Diameter, 3/8” Wall
Cutter Shaft Bearings
1-15/16” Bore greasable,sealed,self aligning
Rear Roller
6” diameter, 1/4” wall, full length tube rated at 6,000 lbs.
Weight (Approximate)
62”-1720 lbs., 74”-1870 lbs.
Knife Pairs
62” - 36 Coarse Cut, 76 Fine Cut
74” - 36 Coarse Cut, 92 Fine Cut
Replaceable Skid Shoes
Standard
Tractor HP Requirements
Minimum 50-90 HP
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)