Tiger Mowers JD 5065M Manuel D’Utilisation

Assembly Section 2-10

The hydraulic pressure line will be plumbed into the tractors power beyond port.  

Locate the power beyond port on the upper right side of the tractor rear remotes, 
remove the plug (refer to the illustration below and the Parts Section).  After the plug 
is removed, connect the adapter and route the hose from the adapter to the lift valve, 
as shown in the Parts Section.    

The return line will be plumbed into the front of the Branch Tee, as shown in 

previous illustration, which will be assembled into the adapter located below the 
tractors’ power beyond port.  Remove the elbow or plug from the rear remotes and 
replace it with the supplied Branch Tee.  Connect the line from the Mid-mount valve to 
the Branch Tee.  If your tractor does not have a Mid-mount valve, then install the 
supplied cap on the back side of the Branch Tee.  Plumb the return line from the front 
ot the Branch Tee to the adapter on the lift valve.