Alamo SM72 Manuel D’Utilisation

SM72   02/10

Assembly Section 3-4

© 2010 Alamo Group Inc.

1. Elevate the rear of the unit approx. 2' to prevent

oil from running out of gearbox

2. Remove gearbox shipping cover(00776159)

and bolts and discard.

3. Replace gasket (2) with new gasket included in

motor kit.

4. Verify that motor part number matches order.
     

Description

Part 

     

Low volume

00777954

     

Medium volume

00777953

     

High volume

00777952

5. Align Motor with return (Tank Port) facing

discharge side of Mower

6. Hand thread four 1/2” x 1-1/2” grade 8 bolts and

lockwashers into spindle.

7. Ensure that motor is fully seated and evenly

tighten the four mounting bolts to 80ft. lbs.

8. Connect Hydraulic hoses to Motor Check to

ensure hoses and motor are free of
contamination.

9. With deck on a level surface check lubrication

level in gearbox per dip stick.

10. Apply Decal (16) to mower deck for

identification. (Refer to Figure Asm-R-0276)