Multiquip BS46HLE Manuel D’Utilisation

5.  Grasp the starter grip (Figure 24) and slowly pull it out. 

The resistance becomes the hardest at a certain 

position, corresponding to the compression point. Pull 

the starter grip briskly and smoothly for starting.

6.  If the engine has started, slowly return the choke lever  

(Figure 25) to the 

cLOSEd position. If the engine has 

not started repeat steps 1 through 5.

7.  Before the trowel is placed into operation, run the 

engine for several minutes. Check for fuel leaks, and 

noises that would associate with a loose guard ring 

and/or covers.

1.  With the engine running at idle, place the safety stop 

switch lever in the 

"Off" position (Figure 26). Verify 

that the engine shuts off. If the engine continues to run, 

replace centrifugal safety stop switch.

2. 

Before performing this test, clear the area around the 

trowel. Make sure it is free of debris and objects. Move 

the safety stop switch lever to the 

"ON" position, restart 

the engine and let idle.

Stand behind the handle and spin the handle to the right, 

simulating a runaway situation. (See Figure 27).  

Centrifugal force should throw the safety switch outward 

to the "

Off" position thus shutting off the engine.

OFF

KE

EP CLEAR