Flymo 380 Manuel D’Utilisation

1. Start mowing the edge of the lawn nearest to the

power point so the cable is laid out on the lawn
you have already cut.

2. Mow twice a week during the growing season,

your lawn will suffer if more than a third of its
length is cut at one time and this may also result
in poor collection.

Do Not Overload Your Mower
Mowing long thick grass may cause the motor

speed to drop, you will hear a change in the motor
sound.  If the motor speed drops you may overload
your lawnmower which may cause damage.  When
mowing in long thick grass a first cut with the cut-
ting height set higher will help reduce the load. See
Adjusting the Cutting Height.
REMEMBER: For best grass collection always
mow in a straight line, do not swing the lawnmower
from side to side.

To Start your Lawnmower
The Flymo Vision Compact uses an advanced belt drive
system, between the motor and the blade which
improves cutting power and flotation in all conditions.
Due to the high turning force (Torque) which this motor
develops a light squeak may be heard when the
machine is started, this is quite normal and will not
affect the performance of the product
1. Connect female extension cable connector to the

back of the switchbox. (D)

2. Form loop in mains cable and push the loop

through the slot as illustrated in picture (E)

3. To secure, position loop over the hook and pull

the cable back through the slot as illustrated in
picture (F).

4. Connect plug to mains and switch on.
5. To prevent a ring being cut in your lawn and to

clear any residual grass in the collection chute, tilt
your lawnmower slightly (G).  

The switchbox is provided with a lock-off button
(H1) to prevent accidental starting.
6. Press and hold the lock-off button (H) on the

switchbox, then squeeze one of the Start/Stop
levers towards the upper handle (J).

7. Continue to squeeze the start/stop lever towards

the upper handle and release the lock-off button.

8. When the lawnmower has reached full speed

gently lower it onto the lawn.

To Stop your Lawnmower
1. To prevent a ring being cut in your lawn and to

clear any residual grass in the collection chute, tilt
your lawnmower slightly (H).

2. Release the pressure on the Start/Stop lever.