Ferris Industries 5900591 Manuel D’Utilisation

Tire Pressure should be checked periodically, and 
maintained at the levels shown in the chart. Note 
that these pressures may differ slightly from the “Max 
Inflation” stamped on the side-wall of the tires. The 
pressures shown provide proper traction, improve cut 
quality, and extend tire life.

Regular Maintenance

The following schedule should be followed for normal care of your rider and mower.  You will need to keep a 
record of your operating time.  Determining operating time is easily accomplished by observing the hour meter.

  Check Safety Interlock System

  Check Rider Brakes

  Check Rider / Mower for loose hardware

  Check Gearbox Oil Level***

  Clean Deck & Check / Replace Mower Blades

  Lubricate Rider & Mower**

  Clean Battery & Cables

  Check Tire Pressure

  Check Hydraulic Oil**

  Change Hydraulic Oil Filter**

  *  Whichever comes first.

 **  More often in hot (over 85° F: 30°C) weather or 

dusty operating conditions

 *** Change gearbox oil after first 100 hours and every 

500 hours thereafter (See Gearbox Maintenance).

  Check Engine Oil Level

  Check Engine Coolant Level

  Check & Clean Radiator Screens

  Check / Clean Cooling Fins & Intake**

  Check Fuel Filter / Drain Water Seperator

  Service Air Filter

  Change Oil & Filter*

  Check / Replace Spark Plugs

  Change Engine Coolant

  *  Change original engine oil after first 5 hours of 

operation.

 **  More often in hot (over 85° F: 30°C) weather or 

dusty operating conditions

Front

25 psi (1,72 bar)

Rear

18 psi (1,24 bar)

Not 

for  

Reproduction