Great Dane GDRZ61-25KAE Manuel D’Utilisation

Service Steering & Brakes - 37

Service Steering & Brakes

1. Park machine safely. (See Parking Safely in the Safety 
section.) 

2. Lift front of machine with a safe lifting device.

MX15323

3. Remove hex nut (A) and wheel bolt (B).

4. Remove wheel (C) from assembly yoke.

1. Install replacement wheel (C).

2. Install wheel bolt (B) and hex nut (A).

3. Tighten nut.

4. Lower machine.

1. Park machine safely. (See Parking Safely in the Safety 
section.)

2. Raise and securely support the front of the mower deck.

MX15324

3. Remove locknut (A), capscrew (B), two trash guards (C) 
and wheel and tire assembly (D).

4. Remove bearings (E) and spacer tube (F) from wheel.

5. Wipe clean and inspect bearings (E). Replace bearings 
as needed.

6. Install spacer tube (F), press bearings (E) into wheel 
and tire assembly.

7. Install wheel and tire assembly (D), two trash guards 
(C), capscrew (B) and locknut (A).

1. Park machine safely. (See Parking Safely in the Safety 
section.)

2. Raise and securely support the front of the mower deck.