King Kutter 999998 Manuel D’Utilisation
OPERATIONAL SAFETY continued...
Never allow the cutting blade to con-
Never allow the cutting blade to con-
tact such items. Cut material
higher at first, allowing rotary mower to clear hidden objects. Never assume an
area is clear. Always Check!
area is clear. Always Check!
Always stop the tractor, disengage PTO, set brake, shut off the tractor engine,
remove the ignition key, lower implement to the ground and allow mower blades
to come to a complete stop before dismounting tractor. Never leave equipment
unattended with the tractor running.
remove the ignition key, lower implement to the ground and allow mower blades
to come to a complete stop before dismounting tractor. Never leave equipment
unattended with the tractor running.
Never place hands or feet under mower with tractor engine running or before
you are sure all motion has stopped. Stay clear of all moving parts.
you are sure all motion has stopped. Stay clear of all moving parts.
Do not reach or place any part of your body under equipment until it is blocked
securely.
securely.
Do not allow riders on the rotary mower or tractor at anytime. There is no safe
place for any riders.
place for any riders.
Do not operate unless all personnel, livestock, and pets are several hundred
feet away to prevent injury by thrown objects.
feet away to prevent injury by thrown objects.
Never operate tractor and rotary mower under trees with low hanging limbs. Op-
erators can be knocked off the tractor and then run over by the rotating blades.
erators can be knocked off the tractor and then run over by the rotating blades.
The rotating parts of this machine have been designed and tested for rugged
use. However, they could fail upon impact with heavy, solid objects such as steel
guardrails and concrete abutment. Such impact could cause the broken objects
to be thrown outward at very high velocities. To reduce the possibility of property
damage, serious injury, or even death, never allow the cutting blades to contact
such obstacles.
use. However, they could fail upon impact with heavy, solid objects such as steel
guardrails and concrete abutment. Such impact could cause the broken objects
to be thrown outward at very high velocities. To reduce the possibility of property
damage, serious injury, or even death, never allow the cutting blades to contact
such obstacles.
Stop mower and tractor immediately upon striking an obstruction. Turn engine
off, remove key, inspect and repair any damage before resuming operation.
off, remove key, inspect and repair any damage before resuming operation.
Stay alert for uneven terrain, holes, rocks, and roots and other hidden hazards.
Keep away from drop-offs and hazards that could cause roll over.
Keep away from drop-offs and hazards that could cause roll over.
Use extreme care and maintain minimum ground speed when transporting or
operating on hillsides, over rough ground and when operating close to ditches or
fences. Be careful and slow down when turning sharp corners and changing di-
rection on slopes. Do not start or stop suddenly on slopes. Avoid operation on
steep slopes. In extremely uneven terrain, rear wheels weights, front tractor
weight, and/or tire ballast should be used to improve stability.
operating on hillsides, over rough ground and when operating close to ditches or
fences. Be careful and slow down when turning sharp corners and changing di-
rection on slopes. Do not start or stop suddenly on slopes. Avoid operation on
steep slopes. In extremely uneven terrain, rear wheels weights, front tractor
weight, and/or tire ballast should be used to improve stability.
15