HTC LZ30 / 968999776 Manuel D’Utilisation

OPERATION

34

 - Husqvarna

8011-603a

Observe and flag rocks and other fixed objects to 

• 

avoid collisions.
Begin with a high cutting height and reduce it until 

• 

the desired mowing result is attained. The average 

lawn should be cut to 2½" (64 mm) during the 

cool season and over 3" (76 mm) during the hot 

months. For healthier and better looking lawns, 

mow often after moderate growth.
For best cutting performance, grass over 6" (15 

• 

cm) in height should be mowed twice. Make the 

first cut relatively high; the second to the desired 

height.
The mowing result will be best with a high engine 

• 

speed (the blades rotate rapidly) and low speed 

(the rider moves slowly). If the grass is not 

too long and dense, the driving speed can be 

increased without negatively affecting the mowing 

result.
The finest lawns are obtained by mowing often. 

• 

The lawn becomes more even and the grass 

clippings more evenly distributed over the mown 

area. The total time taken is not increased as a 

higher operating speed can be used without poor 

mowing results.
Avoid mowing wet lawns. The mowing result is 

• 

poorer because the wheels sink into the soft lawn, 

clumps build, and the grass clippings fasten under 

the cowling.
Hose the mower deck underside with water after 

• 

each use. When cleaning, the mower deck shall 

be raised into the transport position. Make sure the 

mower is cooled and the engine is off.
Use compressed air to clean top surface of the 

• 

deck. Avoid flooding water on top surface, engine 

and electrical components.
When the mulching kit is used, it is important that 

• 

the mowing interval is frequent.