Husqvarna WH4818 / 966638602 Manuel D’Utilisation

Page de 52
ContRols
17
1
Throttle Control
The throttle control regulates the engine speed and 
thereby the rate of rotation of the blades, assuming 
the blade engagement control is engaged (pulled up).
In order to increase or decrease the engine 
speed, the control is moved forward or backward 
respectively.
Avoid idling the engine for long periods, as there is a 
risk of the spark plugs fouling.
For best mower performance, USe FUll THROTTle 
WHeN mOWING.
Neutral Lock
located on top the motion controls, the neutral locks 
keep the unit from moving while idling. The locks 
should be activated when starting the engine. To 
disengage the locks, squeeze slightly upward on the 
driver levers and using thumbs, slide the neutral locks 
back.
IMPORTANT INFORMATION
Be sure neutral locks are either fully forward  
(locked) or fully back (unlocked). If the neutral 
lock is between full forward and full back, the 
machine will not track properly.
Tracking Adjustment
If the mower is not tracking straight, check the 
air pressure in both rear tires. Recommended 
air pressure is 15 psi (1 bar). Tracking should be 
checked on a flat, level surface.
loosen the lock knob (1). Turn the tracking knob (2) 
clockwise to adjust the mower to the left. Turn the 
knob counter-clockwise to adjust the mower to the 
right.
8062-003
Throttle control
8062-044
Neutral Lock - left hand
8062-027
Tracking knob
2