Husqvarna Automower Manuel D’Utilisation

18

Automower from

™

This chapter describes how you install Automower 
from Husqvarna™. Before starting the installation read 
the previous chapter 2. Presentation.

Read the whole of this chapter too before starting the 
installation. How the installation is made also affects 
how well Automower will work. It is therefore important 
to plan the installation carefully.

Planning is simplified if you make a sketch of the 
working area, including all obstacles. This makes it 
easier to see the ideal positions for the charging 
station, boundary wire and guide wire, if used. Draw on 
the sketch how the boundary wire and the guide wire, if 
used, should be routed. 

3.1 Preparations.

3.2 Installation of the charging station.

3.3 Charging the battery.

3.4 Installation of the boundary wire.

3.5 Connecting the boundary wire.

3.6 Checking the installation.

3.7 Linking the Automower to the charging station.

3.8 Installation of the guide wire.

To carry out a complete start-up of an Automower the 
charging station must be in position and connected, the 
boundary wire connected, and the mower connected to 
the charging station. If you would like to start the 
mower without having completed the full boundary 
installation, you can connect a temporary short loop 
around the mower.