Husqvarna MZ61 Manuel D’Utilisation
21
CONTROLS
Parking Brake
The parking brake is found on the left of the machine.
Pull the lever backward to activate the brake and
push forward to release it.
Pull the lever backward to activate the brake and
push forward to release it.
IMPORTANT INFORMATION
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release the
parking brake before moving the mower.
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release the
parking brake before moving the mower.
8058-182
Parking brake
Fuses
Fuses are located on the left hand side of the machine. They
are accessed by tilting the seat forward. Fuses are flat pin
fuses type as used in automobiles.
There are two fuses with ratings and functions:
•
are accessed by tilting the seat forward. Fuses are flat pin
fuses type as used in automobiles.
There are two fuses with ratings and functions:
•
20 A, Primary fuse
•
7.5 A, Mower deck coupling
8050-082
Fuses
Tracking Knob
If the mower is not tracking straight, check the
air pressure in both rear tires. Recommended air
pressure is 15 psi (1 bar) for all tires. Tracking must
be checked on a flat and level concrete or blacktop
surface.
Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with the
steering control levers in the full forward position.
Rotate the knob clockwise (as viewed from the
operation position) to increase the speed on the left
lever. Rotate counterclockwise to decrease speed.
air pressure in both rear tires. Recommended air
pressure is 15 psi (1 bar) for all tires. Tracking must
be checked on a flat and level concrete or blacktop
surface.
Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with the
steering control levers in the full forward position.
Rotate the knob clockwise (as viewed from the
operation position) to increase the speed on the left
lever. Rotate counterclockwise to decrease speed.
8058-182
Tracking knob