Husqvarna R 422Ts AWD Manuel D’Utilisation

 

English

 

 – 

 

3

 

1

 

Charge the battery for 4 hours at max. 3 amp.

2

Fit steering wheel, seat and any optional 
equipment.

3

Check and adjust tyre pressure. (60 kPa, 0.6 bar, 
9 psi).

4

Adjust cutting unit:

Adjust lift springs (effective weight of cutting unit 
should be 12-15kg / 26.5-33 lb).

Adjust cutting unit so that rear edge is about 2-4 
mm / 1/8” higher than front edge.

Adjust the cutting unit’s cutting height setting so 
that the connection rod is tensed at the lowest 
cutting height.

5

Check that the right amount of oil is in the engine.

6

Check that there is oil in the transmission’s oil 
tank.

7

Connect battery.

8

Fill with fuel and start engine.

9

Check that machine does not move in neutral.

10 Check:

Forward drive.

Reverse drive.

Operation of blades.

Seat safety switch.

Lif lever safety switch.

The safety switch for the hydrostat pedals.

11 Tell customer about:

Needs and benefits of following the service 
schedule.

Servicing and the influence of this journal on the 
second-hand value of the machine.

The transmission warranty is only valid if front 
and rear wheel rotation speed has be checked in 
accordance with the service schedule. Adjust if 
necessary according to the table values specified in the 
workshop manual. Performed by authorized servicing 
dealer. The system will be damaged if this adjustment is 
not carried out. (Only AWD-machines)

Range of applications for BioClip.

Complete proof of sale etc.

 

 

 

Pre-delivery service carried out. No outstanding problems. 
Certified:

 

 

 

 

________________________________________________ 
Date, mileage, stamp, signature

 

1

 

Change engine oil

2

Changing the gearbox oil (Only AWD-machines)