Husqvarna 961430099 Manuel D’Utilisation

Maintenance, re pair, or re place ment of the emission con trol 
de vic es and sys tems, which are be ing done at the cus tom-
 ers expense, may be performed by any non-road engine 
repair es tab lish ment or individual. Warranty repairs must 
be performed by an authorized engine man 

u fac tur er's 

service outlet.

Your engine speed has been factory set.

Immediately prepare your mower for storage at the end of 
the season or if the unit will not be used for 30 days or more. 

When lawn mower is to be stored for a period of time, clean 
it thoroughly, remove all dirt, grease, leaves, etc.  Store in 
a clean, dry area.

1.  Clean entire lawn mower (See “CLEANING” in the 

Maintenance section of this manual).

2.  Lubricate as shown in the Maintenance section of this 

manual.

3.  Be sure that all nuts, bolts, screws, and pins are securely 

fastened.  Inspect  moving parts for damage, breakage 
and wear.  Replace if necessary.

4.  Touch up all rusted or chipped paint surfaces; sand 

lightly before painting.

You can fold your lawn mower han dle for storage.

1.  Loosen the two “star” handle knobs on sides of the 

upper handle and allow handle to fold down to the rear.

2.  Loosen the two “standard” handle knobs on sides of 

the lower handle and pivot entire handle as sem bly 
forward and allow it to rest on mower.

3.  Reinstall “standard” knobs and carriage bolts to lower 

handle or handle brackets for safe keeping.

• 

When setting up your handle from the storage posi-
tion, you must manually lock lower handle into mowing 
position.

IMPORTANT:  WHEN FOLDING THE HANDLE FOR STORAGE 
OR TRANSPORTATION, BE SURE TO FOLD THE HANDLE AS 
SHOWN OR YOU MAY DAMAGE THE CONTROL CABLES.

Your carburetor is not adjustable. 

IMPORTANT:  NEVER TAMPER WITH THE ENGINE 
GOVERNOR, WHICH IS FACTORY SET FOR PROPER 
ENGINE SPEED.  OVER SPEED ING THE ENGINE ABOVE THE 
FACTORY HIGH SPEED SETTING CAN BE DANGEROUS.  IF 
YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS 
ADJUSTING, CONTACT YOUR NEAREST HUSQVARNA 
OR OTHER AUTHORIZED SER VICE CEN TER, WHICH HAS 
PROPER EQUIP 

MENT AND EXPERIENCE TO MAKE ANY 

NEC ES SARY ADJUSTMENTS.