Husqvarna IZ 21 Manuel D’Utilisation
English-
19
CONTROLS
5. Blade switch
In order to engage the mower deck, pull the
knob out; the mower blades are disengaged
when the knob is depressed.
knob out; the mower blades are disengaged
when the knob is depressed.
6. Ignition Switch
The ignition key is placed in the ignition
switch on the driver s panel and is used to
start and stop the engine.
switch on the driver s panel and is used to
start and stop the engine.
7. Fuses
The fuses are located in a holder to the left of
the hydraulic tank. They are flat pin fuses of
the same type used in automobiles.
the hydraulic tank. They are flat pin fuses of
the same type used in automobiles.
There are three fuses, as well as socket for
one spare fuse.
one spare fuse.
Fuse ratings and functions:
¥
20 A, Primary fuse.
¥
7.5 A, Mower deck coupling.
¥
7.5.A, Accessory outlet.
¥
Socket for spare fuse.
8011-510
Blade Switch
8011-521
Ignition key and hour meter
IMPORTANT INFORMATION
Do not run the starter for more than five
seconds each time. If the engine does not
start, wait about 10 seconds before re-
trying.
seconds each time. If the engine does not
start, wait about 10 seconds before re-
trying.
8011-443
Fuses