Husqvarna IZ 21 Manuel D’Utilisation

Page de 80
English-
51
MAINTENANCE
Cleaning and Washing
Regular cleaning and washing, especially 
under the mower deck, will increase the 
machine s lifespan. Make it a habit to clean 
the machine directly after use (after it is 
cooled), before the dirt sticks.
Do not spray water on the top of the mower 
deck. Use compressed air to clean the top 
side of mower deck. Regularly clean deck 
and underside of deck, avoid spraying engine 
and electrical components with water.
Caster Wheels
Check every 200 hours. Lift front of unit off of 
ground so caster wheels can rotate freely. 
Tighten caster bolt (34) then back off 1/2 turn. 
Check that wheel rotates freely. If wheel does 
not rotate freely back the caster bolt off in 1/4 
turn increments until wheel rotates freely.
Foam filled tires or solid tires will void the 
warranty.
Removal and installation of caster wheel
1.
Remove nut (35) and caster bolt (34).
2.
Pull the wheel out of the fork and take 
care of the sleeve (36).
3.
Install in reverse order. Tighten caster 
bolt according to instructions above.
Hardware
Check daily. Inspect the entire machine for 
loose or missing hardware.
8011-644
Cleaning
Use protective glasses when 
cleaning and washing.
8011-619
Caster wheels
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam 
fill material to the tires. Excessive loads 
created by foam filled tires will cause 
premature failures.
Only use O.E.M. specified tires.