Husqvarna 15V2s AWD Manuel D’Utilisation

 

English

 

 – 3

 

1

 

Top up battery with acid and charge for four hours.

 

Charge at 3 ampere for 4 hours.

2

Fit steering wheel, seat and any optional equipment.

3

Check and adjust tyre pressure (60 Kpa, 0.6 bar).

4

Adjust cutting unit:

Adjust lift springs (effective weight of cutting unit should be 12-15kg / 26.5-33 lb).

Adjust cutting unit so that rear edge is about 2-4 mm / 1/8” higher than front edge.

Adjust cutting unit height setting so that cutting height limit is 5 mm / 3/16” above the frame of the unit at the lowest 
cutting height.

5

Check that the right amount of oil is in the engine.

6

Check that there is oil in the transmission’s oil tank.

7

Connect battery.

8

Fill with fuel and start engine.

9

Check that machine does not move in neutral.

10 Check:

Forward drive.

Reverse drive.

Operation of blades.

Seat safety switch.

Lif lever safety switch.

The safety switch for the hydrostat pedals.

11 Check engine speed, 2900

 

±

 

100 rpm.

12 Tell customer about:

Needs and benefits of following the service schedule.

Servicing and the influence of this journal on the second-hand value of the machine.

Range of applications for BioClip.

Complete proof of sale etc.

Pre-delivery service carried out. No outstanding problems. Certified:

Date, mileage, stamp, signature

 

1

Change engine oil