Ariens 915163 Manuel D’Utilisation

Page de 34
EN - 4
SAFETY ALERTS
The safety alert symbol is used in decals and 
with this manual. Understand the safety 
message. It contains important information 
about personal safety.
NOTATIONS
NOTICE:  General reference information for 
proper operation and maintenance practices.
IMPORTANT: Specific procedures or 
information required to prevent damage to 
unit or attachment.
SAFETY DECALS AND 
LOCATIONS
ALWAYS replace missing or damaged Safety 
Decals. Refer to figure 2  for Safety Decal 
locations.
SAFETY
WARNING: This cutting machine 
is capable of amputating hands 
and feet and throwing objects. 
Failure to observe the safety 
instructions in the manuals and 
on decals could result in serious 
injury or death.
Slopes are a major factor related 
to loss-of-control and tip-over 
accidents. Operation on all slopes 
requires extra caution.
Tragic accidents can occur if the 
operator is not alert to the 
presence of children. Never 
assume that children will remain 
where you last saw them.
Gasoline is extremely flammable 
and the vapors are explosive, 
handle with care.
Disengage attachment, stop unit 
and engine, remove key, engage 
parking brake, and allow moving 
parts to stop before leaving 
operator’s position.
Look for these symbols to 
point out important safety 
precautions. They mean:
Attention!
Personal Safety Is 
Involved!
Become Alert! 
Obey The Message!
DANGER: IMMINENTLY 
HAZARDOUS SITUATION! If not 
avoided, WILL RESULT in death 
or serious injury.
WARNING: POTENTIALLY 
HAZARDOUS SITUATION! If not 
avoided, COULD RESULT in 
death or serious injury.
CAUTION: POTENTIALLY 
HAZARDOUS SITUATION! If not 
avoided, MAY RESULT in minor 
or moderate injury. It may also be 
used to alert against unsafe 
practices.