Ariens 891003 Manuel D’Utilisation
15
Removing Bagger Kit
1. Lift thumb latch and remove hose from blower
assembly and bagger assembly (see figure 14 on
page 14).
page 14).
2. Remove belt guard.
3. Remove V-belt from double pulley (see figure 12 on
4. Remove blower assembly (see figure 11 on
5. Re-install the original belt cover.
6. Install discharge chute.
7. Remove cast iron weights (see figure 4 on
8. Remove catcher assembly (see figure 8 on
NOTE: When removing the grass bagger, do not
disassemble the entire kit. Remove the bagger cover
assembly from the lower mount bracket. You can remove
the lower mount or keep it installed. If you remove the
lower mount, replace the original bumper on the unit.
disassemble the entire kit. Remove the bagger cover
assembly from the lower mount bracket. You can remove
the lower mount or keep it installed. If you remove the
lower mount, replace the original bumper on the unit.
REMOVAL
CAUTION: Deflected material may cause injury.
ALWAYS operate mower with bagger cover
closed and secured, blower assembly fastened
securely, or with chute deflector in operating
position.
ALWAYS operate mower with bagger cover
closed and secured, blower assembly fastened
securely, or with chute deflector in operating
position.
CAUTION: Always install counterweights on
front axle before operating unit with bagger
attached. Always remove counterweights from
front axle when bagger is removed from the unit.
front axle before operating unit with bagger
attached. Always remove counterweights from
front axle when bagger is removed from the unit.