Dixon 968999515 Manuel D’Utilisation
10
ASSEMBLY
8
FRONT WEIGHTS
(See Figure 8)
(See Figure 8)
1. Remove foot rest from the front of the mower.
2. Remove the two (2) front bolts that secure
2. Remove the two (2) front bolts that secure
the caster casting to the sides of the frame.
3. Remove the two (2) bolts that secure the
caster castin to the bottom of the frame.
4. Place weight bracket on the front of the
frame.
FIGURE 8
539113177 (CAST WEIGHT)
539113182
(SCREW #10-12 X 1)
(SCREW #10-12 X 1)
539976979
(NUT, 3/8-16, NYLOC)
(NUT, 3/8-16, NYLOC)
CAUTION
DO NOT operate mower with grass catcher,
unless the front weights are installed.
unless the front weights are installed.
539990588
(BOLT, 3/8-16 X 2, GR5)
(BOLT, 3/8-16 X 2, GR5)
539113225
(WEIGHT BRACKET)
(WEIGHT BRACKET)
5. Secure the weight bracket to the frame with
the four (4) previously removed bolts.
6. Install weight to the weight bracket with two
(2) bolts (539990588) and two (2) nuts
(539976979).
(539976979).
7. Install foot rest on the weight bracket with six
(6) (539113183 and two (2) (539113182)
screws.
NOTE: the shorter screws go in the center.
screws.
NOTE: the shorter screws go in the center.
FOOT REST
PREVIOULY REMOVED
HARDWARE
HARDWARE
539113183
(SCREW #10-12 X 1 1/4)
(SCREW #10-12 X 1 1/4)