Country Home Products FIELD and BRUSH MOWER Manuel D’Utilisation
24
DR
ALL-TERRAIN
FIELD and BRUSH MOWER Safety & Operating Instructions
Grease Fittings
1. There are two grease fittings
below the black belt guard that
need maintenance (Figure 10):
need maintenance (Figure 10):
■
The belt idler arm should
have 1-2 pumps of grease
every 25 operating hours.
have 1-2 pumps of grease
every 25 operating hours.
■
The mower spindle should
have 3-4 pumps every 100
operating hours.
have 3-4 pumps every 100
operating hours.
Note: Over greasing will cause
grease to leak out of the
seals onto the mower drive
belt. Unless instructed
otherwise, pump only
until you feel slight
resistance (1-2 pumps).
seals onto the mower drive
belt. Unless instructed
otherwise, pump only
until you feel slight
resistance (1-2 pumps).
2.
The drive chain should be
lubricated with FLUID
FILM
lubricated with FLUID
FILM
®
lubricant or SAE 30
oil every 25 operating hours—
more often if the machine is
operated in extremely dusty or
wet conditions. Remove the
chain cover, lubricate the
chain and replace the cover
(Figures 11 and 12).
more often if the machine is
operated in extremely dusty or
wet conditions. Remove the
chain cover, lubricate the
chain and replace the cover
(Figures 11 and 12).
Figure 11
Figure 10
Figure 12
Spindle Grease Fitting
Belt Idler Arm Grease Fitting
Remove Chain Cover
Lubricate Chain