Nilfisk-Advance America P 150.1 Manuel D’Utilisation
8
4.0 Maintenance
EN
6.0 Recycling the washer
7.0 Questions and an swers
Why do I have to use an atomizer for some de ter -
gents?
Some detergents (except from soaps) must be
applied undiluted. For that purpose an atomizer or
maybe a brush is unique.
gents?
Some detergents (except from soaps) must be
applied undiluted. For that purpose an atomizer or
maybe a brush is unique.
Why must the high pressure washer be stored in a
frost free room?
The machine may contain water which, when freez-
ing, may damage vital parts.
frost free room?
The machine may contain water which, when freez-
ing, may damage vital parts.
How do I store my high pressure washer in the best
possible way?
Always empty the high pressure washer of water by
activating the trigger of the spray gun - after having
disconnected the water supply. Always detach the
high pressure hose (only PRO 130/150/160) and
coil it up with out bending it.
possible way?
Always empty the high pressure washer of water by
activating the trigger of the spray gun - after having
disconnected the water supply. Always detach the
high pressure hose (only PRO 130/150/160) and
coil it up with out bending it.
May I use an ordinary detergent in my high pres -
sure washer?
No. You may damage the cleaner and achieve a bad
result. The detergents of Nilfi sk have been specially
developed for use with a high pressure washer and
ensures a correct dosage and a quick effect.
sure washer?
No. You may damage the cleaner and achieve a bad
result. The detergents of Nilfi sk have been specially
developed for use with a high pressure washer and
ensures a correct dosage and a quick effect.
Can I do anything special to keep my high pres sure
washer in a good condition?
Yes, beyond cleaning it carefully before set aside,
it will be a good idea to lubricate the couplings now
and then with grease or vaseline.
washer in a good condition?
Yes, beyond cleaning it carefully before set aside,
it will be a good idea to lubricate the couplings now
and then with grease or vaseline.
5.0 Storage
EN
The machine should be stored in a frost-free
room!
Pump, hose and accessories should al ways be
emptied of water prior to storing as fol lows:
1. Stop the machine (rotary switch (2) in pos. O)
room!
Pump, hose and accessories should al ways be
emptied of water prior to storing as fol lows:
1. Stop the machine (rotary switch (2) in pos. O)
and de tach water hose and ac ces so ry.
2. Restart the machine and activate the trig ger.
Let the machine run until no more water runs
through the spray gun.
through the spray gun.
3. Stop the machine and unplug. Wind the elec-
tric cable round the hooks placed on the side
of the machine.
of the machine.
4. Separate spray gun and high pressure hose.
5.
5.
PRO 130/150/160:
Detach high pres sure hose,
coil it up and place it on the hose storage.
PRO 130/150/160 X-TRA:
Coil the high pres-
sure hose up on the hose reel.
6. Place spray gun, nozzles and other ac ces so -
ries in the holders of the machine.
Should the machine by mistake be frozen, it will
be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the
guarantee!
be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the
guarantee!
WARNING! Always disconnect the plug from the
socket prior to maintenance or cleaning.
To ensure a long and problem free working life,
please take the following advice:
• Wash out water hose, high pressure hose, spray
socket prior to maintenance or cleaning.
To ensure a long and problem free working life,
please take the following advice:
• Wash out water hose, high pressure hose, spray
lance and accessories before mounting.
• Clean the couplings of dust and sand.
Any repair should always be made in an authorised
workshop with original spare parts.
Any repair should always be made in an authorised
workshop with original spare parts.
4.1 Cleaning of nozzle
A clogging up in the nozzle causes a lower water
volume This is why clean ing is re quired immediately.
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle with the cleaning nee dle (10).
volume This is why clean ing is re quired immediately.
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle with the cleaning nee dle (10).
IMPORTANT: The needle should only be used
when the spray lance is detached!
when the spray lance is detached!
3. Flush the spray lance backwards with wa ter.
4.2 Cleaning of water inlet fi lter
Clean the water inlet fi lter regularly once a month or
more frequently according to use.
1. Detach water inlet hose and coupling (4).
2. Pull out the fi lter and rinse it carefully.
3. Check that it is intact before re-mount ing it.
more frequently according to use.
1. Detach water inlet hose and coupling (4).
2. Pull out the fi lter and rinse it carefully.
3. Check that it is intact before re-mount ing it.
Make the old cleaner unusable immedi-
ately.
ately.
1. Unplug the cleaner and cut the electric
cable.
Do not discard electrical appliances with
household waste.
As specifi ed in European Directive 2002/96/EC
on old electrical and electronic appliances, used
electrical goods must be collected separately and
recycled ecologically.
household waste.
As specifi ed in European Directive 2002/96/EC
on old electrical and electronic appliances, used
electrical goods must be collected separately and
recycled ecologically.
Contact your local authorities or your nearest dealer
for further information.
for further information.