Casablanca Fan Company C16G73T Manuel D’Utilisation

Step 4a. Unscrew and remove both pieces of the control 
housing cover. Set the control housing cover and six 
screws aside. You will re-install the control housing 
cover in Step 4e.

Step 4b. Unscrew and remove cross bolt and nut from 
downrod adapter tube in center of control housing. 

Step 4c. Thread black, white, and green wires up through 
downrod, tightening to the base of the downrod adapter 
tube in the control housing structure.

Step 4d. Slide downrod into downrod adapter tube 
making sure no wires are pinched. Place your thumb on 
the end of the cross-bolt. Insert the cross-bolt until its fl at 
end is fl ush with the downrod adaptor tube. Re-attach the 
nut, and tighten fi rmly with 7/16" wrench.

NOTE: Be careful not to cut or pinch the wires when 
inserting the cross-bolt.

Step 4e. Use the parts you set aside in Step 4a to replace 
the control housing cover and screw it back into place. 

NOTE: You will need at least two assistants for this 
step.

Step 5a. Have your assistant(s) help you lift the Candelier 
fi xture to the ceiling.  

Step 5b. Insert the downrod ball into opening in the 
crossbar hanging bracket. 

Step 5c. Slide the hanging bracket support ring up the 
hanging bracket, and screw it into place using the three 
#8-32 x 1/4" screws.