Panasonic FV-10VSL2 Manuel D’Utilisation

3. Install the suspension bracket and the flange of fan 
    body to joists by using long screws (ST4.2X20).
    (If spacing A between joists is 10 1/4 12 inches, 

~

    install the flange of fan body according to Fig.3-2, 
    others according to Fig.3-1 install the product.)

4. Install the suspension bracket to joists by using long
    screws (ST4.2X20) and secure it to the fan body by
    using screw    (ST4.2X12). (Fig.4)

5. Remove junction box cover and secure conduit or 
    stress relief to junction box knock-out hole. (Fig.5)

6. Refer to wiring diagram (page 4).
    Using wire nuts, connect house power wires to
    ventilating fan wires and lighting unit wires:
    black to black; white to white; green to green;
    Replace the junction box cover. (Fig.5)

CAUTION:

Mount junction box cover carefully so that lead
wires are not pinched.

7. Squeeze the circular duct to fit the adaptor,
    then slipped onto the adaptor and secure
    it with duct tape. 

 h

4

in

c

es

Squeeze

Fig. 4

Fig. 3-2

2 Long screws
(ST4.2X20)

Screw
(ST4.2X12)

Joist

Fig. 3-1

INSTALLATION   (JOIST MOUNTING-  ) CONTINUED

Fan body

2 Long screws
(ST4.2X20)

Joist

A=10 1/4 12 inches

~

4 Long screws (ST4.2X20)

Fan body

Joist

6

Fig. 5

Knock-out hole

Junction box
cover

Joist

Duct tape

Circular duct

Conduit

Wire nut

Green wires

Lead wires

Junction box

Conduit