McCulloch 96182000600 Manuel D’Utilisation

9

To engage the auger blades, hold the control bar against 

the handle (Figure 15).

To disengage the auger blades, release the control bar 

(Figure 16).

  The electrical cord can become damaged, causing 

IMPORTANT:  Run the electric starter no more than 10 

times at intervals of 5 seconds on, then 5 seconds off. 

Running the electric starter extensively can overheat and 

damage it. If the engine does not start after this series 

of attempts, wait at least 40 minutes to allow the starter 

to cool before attempting to start it again. If the engine 

does not start after the second series of attempts, take 

the snowthrower to an Authorized Service Dealer for 

service.
NOTE: If you pull the recoil handle and feel no resistance, 

the starter may be frozen. Thaw out the starter before 

attempting to start the snowthrower.
5.   While the engine is running, move the choke lever 

slowly to the right position.

6.   Unplug the extension cord from the power source and 

the snowthrower (Figure 13).

Figure 15

1. Control bar

1

Figure 16

1. Control bar

1

1. Recoil start handle

Figure 14

1